Reasons For The Decline In The Concentration Of Finished Silver Formaldehyde

As a Hydrogen Peroxide Industrial Plant, let's analyze the reasons for the decline in the concentration of finished formaldehyde in silver.
The main reasons for the decrease in formaldehyde concentration are:
1. Add too much water to the top of the absorption tower;
2. The amount of steam in the ingredients is too much;
3. Excessive amount of diphenyl formaldehyde produced by the two towers;
4. The reaction temperature is too low;
5. The catalyst conversion rate is reduced;
6. Oxidizer waste heat boiler tube leakage;
7. The circulating fluid cooler leaks.
Hydrogen Peroxide Production Methods
It was found that the concentration of formaldehyde decreased, firstly reducing the amount of water added to the top of the tower. Immediately afterwards, the reason was found, and the process parameters such as the amount of water added to the top of the tower, the amount of steam of the ingredients, the reaction temperature, and the like were adjusted in time, and some oxygen temperatures were raised to observe the conversion rate. If you still don't get better, just stop for further inspection or replace the catalyst.
Our company offers Hydrogen Peroxide Production Methods. Welcome to contact us.

评论

发表评论

此博客中的热门博文

Introduction of Auto-oxidation Process

图片
  Today we will explain  the  Introduction of Auto-oxidation Process . Rancidity may be said to be the subjective organoleptic appraisal of the off-flavour quality of meals. Oxidative rancidity is worried about the changes that lead to the reactions involving the lipids in meals with atmospheric oxygen.Oxidation of unsaturated lipids not only generates offensive odors and tastes but may also decrease the nutrient quality and safety due into the formation of secondary reaction products in foods after cooking the oxidative deterioration of food lipids involves, primarly, the autoxidation response, so called due to its autocatalytic mechanism. the autoxidation is a complex procedure which proceeds through complimentary ra-,dicals by a chain mechanism2- 4 • The Understanding of the autoxidation process, even though not clear in most. The facets, is mainly as a result of study of systems.
阅读全文

Poly (propylene carbonate) (PPC) Production Process: A Comprehensive Overview

图片
  PPC is prepared by alternating copolymerization of CO2 and propylene oxide through negative ions, is a biodegradable environment-friendly product with a high-added value and can be completely degraded into water and CO2.   Poly ( propylene carbonate ) (PPC) is a versatile and environmentally friendly polymer with a wide range of applications. From packaging materials to biomedical devices, PPC has gained attention for its unique properties and sustainable production process. In this article, we will delve into the intricacies of the PPC production process, exploring the key steps and factors that contribute to the creation of this innovative polymer.   Understanding Poly (propylene carbonate) (PPC) Poly (propylene carbonate) is a thermoplastic polymer that belongs to the carbonate family. It is known for its excellent thermal stability, biodegradability, and resistance to chemicals. PPC is derived from propylene oxide and carbon dioxide through a polycondensation reaction, leading to
阅读全文

Production Technology of Formic Acid

图片
Methanol Carbonylation Synthesis of Formic Acid from Methyl Formate Formic acid is an important chemical raw material for a wide range of uses. After the successful development and construction of methanol carbonylation of methyl formate 30,000 tons / year industrial plant, the company successfully developed methanol carbonylation of methyl formate , With a short process, easy to obtain raw materials, investment in the province, no waste emissions, the advantages of low production costs. The process flow chart is as follows: Our factory provides good quality of  formic acid technology . Any questions about formic acid technology pls contact us.
阅读全文