What are the Factors Affecting the Evaporation of Raw Materials by Silver Formaldehyde?

As a Hydrogen Peroxide Industrial Plant, let's talk about the factors that affect evaporation.
Evaporator structure
The structure and state of the evaporator determine the efficiency of evaporation. The heating coefficient α on the side of the heated steam condensation is relatively large, while the heat transfer coefficient α on the methanol side is relatively small. In the structural design, the heat supply coefficient on the methanol side should be strengthened to achieve better heat transfer efficiency. Therefore, at the time of design, the circulation speed of the raw material methanol is high, so as to improve heat transfer and enhance evaporation.
2. Evaporation temperature
It is common knowledge that liquids are vaporized by heat and evaporation. It is affirmative to increase the temperature to facilitate the evaporation of methanol. However, when the liquid temperature is lower than the boiling temperature in the operation, the liquid vaporization can only be carried out on the surface, the evaporation rate is slow, and the production efficiency is low. In actual production, the air is bubbled in the liquid layer of methanol, and the gas in the liquid layer is continuously taken away by the air. In order to establish a new gas-liquid equilibrium, the methanol must accelerate evaporation, so that it evaporates rapidly even below the boiling point. Meet production requirements.

Formaldehyde Production Silver Process

3. Evaporation level
Under normal circumstances, the level of evaporation liquid affects the heating area and circulation speed of this methanol. According to the evaporation heat transfer rate equation, the evaporation level is higher as the evaporation liquid level is within the optimum heating height range.
4. Equilibrium concentration of methanol concentration and methanol
When the water content of the raw material methanol is high, the evaporation amount is lowered, and in order to maintain the evaporation amount, the evaporation temperature must be increased accordingly.
In the production process, the liquid phase methanol concentration in the evaporator is collectively referred to as "equilibrium concentration", which is related to the concentration of feed methanol, air temperature, humidity, flow rate, and degree of heating of the evaporator.
5. Air flow rate
In the production of formaldehyde, air is bubbled in methanol to accelerate the evaporation of methanol. The evaporation of methanol will increase significantly with the increase of air flow. Therefore, in the design of the evaporator, the air distribution method also affects the evaporation of methanol.
If you want to know more about the Formaldehyde Production Silver Process, please keep an eye on our website or contact us, https://www.slchemtech.com

评论

发表评论

此博客中的热门博文

Introduction of Auto-oxidation Process

图片
  Today we will explain  the  Introduction of Auto-oxidation Process . Rancidity may be said to be the subjective organoleptic appraisal of the off-flavour quality of meals. Oxidative rancidity is worried about the changes that lead to the reactions involving the lipids in meals with atmospheric oxygen.Oxidation of unsaturated lipids not only generates offensive odors and tastes but may also decrease the nutrient quality and safety due into the formation of secondary reaction products in foods after cooking the oxidative deterioration of food lipids involves, primarly, the autoxidation response, so called due to its autocatalytic mechanism. the autoxidation is a complex procedure which proceeds through complimentary ra-,dicals by a chain mechanism2- 4 • The Understanding of the autoxidation process, even though not clear in most. The facets, is mainly as a result of study of systems.
阅读全文

Poly (propylene carbonate) (PPC) Production Process: A Comprehensive Overview

图片
  PPC is prepared by alternating copolymerization of CO2 and propylene oxide through negative ions, is a biodegradable environment-friendly product with a high-added value and can be completely degraded into water and CO2.   Poly ( propylene carbonate ) (PPC) is a versatile and environmentally friendly polymer with a wide range of applications. From packaging materials to biomedical devices, PPC has gained attention for its unique properties and sustainable production process. In this article, we will delve into the intricacies of the PPC production process, exploring the key steps and factors that contribute to the creation of this innovative polymer.   Understanding Poly (propylene carbonate) (PPC) Poly (propylene carbonate) is a thermoplastic polymer that belongs to the carbonate family. It is known for its excellent thermal stability, biodegradability, and resistance to chemicals. PPC is derived from propylene oxide and carbon dioxide through a polycondensation reaction, leading to
阅读全文

Production Technology of Formic Acid

图片
Methanol Carbonylation Synthesis of Formic Acid from Methyl Formate Formic acid is an important chemical raw material for a wide range of uses. After the successful development and construction of methanol carbonylation of methyl formate 30,000 tons / year industrial plant, the company successfully developed methanol carbonylation of methyl formate , With a short process, easy to obtain raw materials, investment in the province, no waste emissions, the advantages of low production costs. The process flow chart is as follows: Our factory provides good quality of  formic acid technology . Any questions about formic acid technology pls contact us.
阅读全文