Delayed Condensation of Phenolic Wastewater Treatment

As a UF Technology Supplier, let's share with you the delayed condensation method for phenolic wastewater treatment.
First, delay condensation method
The phenolic resin industry wastewater must reach the third-level discharge or the first-level discharge, and must pass the biochemical system to meet the requirements. In order to ensure the stable operation of the biochemical system, the wastewater before entering the biochemical system needs to be pretreated by physicochemical treatment. The delayed condensation method for wastewater with small water volume (20 tons of wastewater/day or less) is an effective pretreatment method. Delayed condensation mainly refers to adjusting the proportion of phenolic according to the proportion of phenolic in the wastewater and the type of phenol. Under the condition of sulfuric acid or oxalic acid catalysis, the phenolic is condensed in two steps at a certain temperature, and the wastewater is condensed. The phenol content is controlled below 1000 mg/L, and the COD is not higher than 20000 mg/L, thereby achieving effective control of phenol content and effective removal of wastewater COD.

Ethyl Acetate Production

Second, the general operating steps of delayed condensation
2.1 one step condensation
The raw waste water is pumped into the delayed condensation kettle, sampled, the content of phenol and formaldehyde is measured, the molar ratio of phenol and aldehyde in the waste water is adjusted, and the pH is adjusted to a suitable pH, and the mixture is heated and stirred to make the temperature in the kettle reach about 95 ° C. After a period of reaction The mixture was allowed to stand, and after the reaction time was reached, the resin was discharged from the bottom of the reaction vessel.
2.2 two-step condensation
After one-step condensation reaction to recover the resin, the wastewater still contains higher concentrations of phenol and formaldehyde. The COD is still higher than 20,000 mg/L. The pH must be adjusted again. After a period of incubation, samples, phenol, content and COD are sampled, and the molar ratio of phenolic is finely adjusted. After that, the phenol content is kept below 1000 mg/L, the COD drops below 20000 mg / L, and then the resin is removed from the bottom of the reactor, and the supernatant is subjected to subsequent pretreatment or directly into the biochemical treatment process.
For more information on Ethyl Acetate Production, please follow our website, https://www.slchemtech.com/

评论

发表评论

此博客中的热门博文

Introduction of Auto-oxidation Process

图片
  Today we will explain  the  Introduction of Auto-oxidation Process . Rancidity may be said to be the subjective organoleptic appraisal of the off-flavour quality of meals. Oxidative rancidity is worried about the changes that lead to the reactions involving the lipids in meals with atmospheric oxygen.Oxidation of unsaturated lipids not only generates offensive odors and tastes but may also decrease the nutrient quality and safety due into the formation of secondary reaction products in foods after cooking the oxidative deterioration of food lipids involves, primarly, the autoxidation response, so called due to its autocatalytic mechanism. the autoxidation is a complex procedure which proceeds through complimentary ra-,dicals by a chain mechanism2- 4 • The Understanding of the autoxidation process, even though not clear in most. The facets, is mainly as a result of study of systems.
阅读全文

Poly (propylene carbonate) (PPC) Production Process: A Comprehensive Overview

图片
  PPC is prepared by alternating copolymerization of CO2 and propylene oxide through negative ions, is a biodegradable environment-friendly product with a high-added value and can be completely degraded into water and CO2.   Poly ( propylene carbonate ) (PPC) is a versatile and environmentally friendly polymer with a wide range of applications. From packaging materials to biomedical devices, PPC has gained attention for its unique properties and sustainable production process. In this article, we will delve into the intricacies of the PPC production process, exploring the key steps and factors that contribute to the creation of this innovative polymer.   Understanding Poly (propylene carbonate) (PPC) Poly (propylene carbonate) is a thermoplastic polymer that belongs to the carbonate family. It is known for its excellent thermal stability, biodegradability, and resistance to chemicals. PPC is derived from propylene oxide and carbon dioxide through a polycondensation reaction, leading to
阅读全文

Production Technology of Formic Acid

图片
Methanol Carbonylation Synthesis of Formic Acid from Methyl Formate Formic acid is an important chemical raw material for a wide range of uses. After the successful development and construction of methanol carbonylation of methyl formate 30,000 tons / year industrial plant, the company successfully developed methanol carbonylation of methyl formate , With a short process, easy to obtain raw materials, investment in the province, no waste emissions, the advantages of low production costs. The process flow chart is as follows: Our factory provides good quality of  formic acid technology . Any questions about formic acid technology pls contact us.
阅读全文