Evaporative Cooling of Silver Formaldehyde Production Equipment

Evaporative cooling is a newly developed refrigeration energy-saving technology; it uses water evaporation and high-temperature and high-pressure superheated steam to condense into a liquid, thereby achieving the purpose of refrigeration. It is widely used in many industries such as petrochemical, light industry and pharmacy, refrigeration and air conditioning, food refrigeration. It is gradually being applied in the formaldehyde industry. As a Heavy Aromatic Distillation Plant, let's explain it to everyone.
01. Structure
The evaporative cold structure is a cooling device that combines a shower tube cooler and a circulation cooling tower. The cooler adopts a counterflow structure, which mainly includes a air cylinder, an axial flow fan, a water collector, a water distributor, a cooling heat exchange tube group, a circulating water pump, a float ball valve and the like. The cooling tubes are used in parallel, the heat exchange area is large, the system resistance is small, the structure is compact, and the floor space is small.
02. Working principle
The gas enters from the upper part of the heat exchange tube group, is distributed to each tube through the header box, and flows out from the lower tube port after the heat exchange is completed. The cooling water is sent to the water distributor on the upper part of the heat exchange tube group by circulating water pump. The water distributor is equipped with a high-efficiency anti-blocking type nozzle, and the water is evenly distributed to each group of tubes, and the water flows down on the outer surface of the tube, and finally The filler layer in the upper part of the pool falls into the pool for recycling.
When water flows through the cooler tube set, the medium in the tube is cooled by the latent heat of evaporation of the water. At the same time, the axial flow induced draft fan takes fresh water from the wind window around the lower side of the cooler to carry the water vapor away.

Formaldehyde Equipment

03. Technical characteristics of evaporative cooling
1. Evaporative cooling adopts a large number of snake-type heat exchange tubes, large heat exchange and gas flow area, compact structure and small floor space. It can still operate normally when the temperature is low in winter.
2. Good energy saving effect and low operating cost: the average 1.1KW condensing load only needs 60~80L/h of circulating water, 3~5L/h of supplementary water, 100~200m3/h of air, and 0.2~0.3KW of water pump and fan. . The amount of evaporation and drainage accounts for 3 to 5% of the total water.
3. High heat exchange effect (temperature difference of inlet and outlet can reach 60 °C), low gas resistance (≤10kPa), reducing power consumption.
4. The circulating water pump is installed on the cooler body. The pipeline process is short, and the special anti-blocking nozzle is used. The water distribution effect is good, the power of the water pump and the fan is small, and the operating cost can be reduced by 40-50%.
5. The use of the tube-type heat exchange tube does not cause clogging, and is especially suitable for environments with poor circulating water quality.
If you want to know more about Formaldehyde Equipment, please keep an eye on our website, https://www.slchemtech.com

评论

发表评论

此博客中的热门博文

Introduction of Auto-oxidation Process

图片
  Today we will explain  the  Introduction of Auto-oxidation Process . Rancidity may be said to be the subjective organoleptic appraisal of the off-flavour quality of meals. Oxidative rancidity is worried about the changes that lead to the reactions involving the lipids in meals with atmospheric oxygen.Oxidation of unsaturated lipids not only generates offensive odors and tastes but may also decrease the nutrient quality and safety due into the formation of secondary reaction products in foods after cooking the oxidative deterioration of food lipids involves, primarly, the autoxidation response, so called due to its autocatalytic mechanism. the autoxidation is a complex procedure which proceeds through complimentary ra-,dicals by a chain mechanism2- 4 • The Understanding of the autoxidation process, even though not clear in most. The facets, is mainly as a result of study of systems.
阅读全文

Poly (propylene carbonate) (PPC) Production Process: A Comprehensive Overview

图片
  PPC is prepared by alternating copolymerization of CO2 and propylene oxide through negative ions, is a biodegradable environment-friendly product with a high-added value and can be completely degraded into water and CO2.   Poly ( propylene carbonate ) (PPC) is a versatile and environmentally friendly polymer with a wide range of applications. From packaging materials to biomedical devices, PPC has gained attention for its unique properties and sustainable production process. In this article, we will delve into the intricacies of the PPC production process, exploring the key steps and factors that contribute to the creation of this innovative polymer.   Understanding Poly (propylene carbonate) (PPC) Poly (propylene carbonate) is a thermoplastic polymer that belongs to the carbonate family. It is known for its excellent thermal stability, biodegradability, and resistance to chemicals. PPC is derived from propylene oxide and carbon dioxide through a polycondensation reaction, leading to
阅读全文

Production Technology of Formic Acid

图片
Methanol Carbonylation Synthesis of Formic Acid from Methyl Formate Formic acid is an important chemical raw material for a wide range of uses. After the successful development and construction of methanol carbonylation of methyl formate 30,000 tons / year industrial plant, the company successfully developed methanol carbonylation of methyl formate , With a short process, easy to obtain raw materials, investment in the province, no waste emissions, the advantages of low production costs. The process flow chart is as follows: Our factory provides good quality of  formic acid technology . Any questions about formic acid technology pls contact us.
阅读全文