Sheets Combined Corrugated Structured Packing

Sheets Combined Corrugated Structured Packing

Each periodic ripple of the Zupak is composed of more than four intermittent planar graphic sheets located on four planes. The lateral projection shape is two interlaced corrugated lines. The uniform parallelogram channel on the filler has completely replaced the circular holes on the regular structured packing. It can not only save 8.5% of the material, but also increase the specific surface area of the corresponding quantity. The packing has the advantages of low pressure, large flux, good transversal air permeability and high separation ability. It can be widely used in the industrial fields of distillation, absorption, extraction, heat exchange, washing and so on.

Compared to corresponding Mellapak packing, Zupak has advantages as follows:

The specific area increases by around 10%;

The porosity opening rate increases by 30-40%;

The separation efficiency increases by about 10%;

The throughout increases 20%;

The pressure drop decreases around 30%.

The specifications of Zupak packing are as follows:

Model	Nominal Specific Area, m2/m3	Peak height, mm		Peak distance, mm		Inclination Angle of Corrugation
		Basic Dimension	Allowable Tolerance	Basic Dimension	Allowable Tolerance	Basic Dimension	Allowable Tolerance
100X	100	31.8	±0.5	51.5	±1.0	30	±2
100Y						45
125X	125	23.8	±0.5	44	±1.0	30	±2
125Y						45
150X	150	21	±0.5	34.3	±1.0	30	±2
150Y						45
200X	200	15.8	±0.5	25.7	±1.0	30	±2
200Y						45
250X	250	11.9	±0.5	23.8	±0.5	30	±2
250Y						45
350X	350	8.6	±0.5	16.2	±0.5	30	±2

https://www.slchemtech.com/structured-packing/